9546 12MM

Scotch-Mount  Double Coated Polyethylene Foam Tape 9546 Product Data Sheet Updated : August 2001 Supersedes : New Product Description Polyethylene foam coated on both sides with a modified Acrylate pressure sensitive adhesive. Physical Properties Adhesive Type Modified Acrylate Foam Core Closed cell Polyethylene Foam Thickness 1.15 mm Release Liner Siliconised white paper Density 67 kg/m³ Tape Colour White Shelf Life 12 months from date of despatch by 3M when stored in the original carton at 21°C (70°F) & 50 % Relative Humidity Not for specification purposes Performance Characteristics Not for specification purposes 180° Peel Adhesion to stainless steel (FINATTM1) One s ide reinforced with PET Film. 20 min dwell 24 hours dwell Static Shear on Stainless Steel (FINATTM8) One side reinforced 18 N/25mm* 18 N/25mm* with PET Film. At 23°C At 70°C Temperature Performance > 150 hours > 30 minutes -40°C to +80°C (Short Term 90°C) Cohesive Failure 2 Date : August 2001 Double Coated Polyethylene Foam Tape 9546 Application Techniques 1. Bond strength is dependent upon the amount of adhesive-tosurface contact developed. Firm application pressure develops better adhesive contact & thus improves bond strength. 2. To obtain optimum adhesion, the bonding surfaces must be clean dry and well unified. A typical surface cleaning solvent is isopropyl alcohol. Use proper safety precautions for handling solvents. 3. Ideal tape application temperature range is 21°C to 38°C (70°F to 100°F). Initial tape application to surfaces at temperatures below 10°C (50°F) is not recommended because the adhesive becomes too firm to adhere readily. However once properly applied low temperature holding is generally satisfactory. 3M and Scotch-Mount are trademarks of the 3M Company. Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications. This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations.  3M United Kingdom PLC 1996 Tapes & Adhesives 3M United Kingdom PLC 3M House, 28 Great Jackson Street, Manchester, M15 4PA Product Information : Tel 0870 60 800 50 Fax 0870 60 700 99 3M Ireland 3M House, Adelphi Centre, Upper Georges Street, Dun Laoghaire,Co. Dublin, Ireland Customer Service : Tel (01) 280 3555 Fax (01) 280 3509